Anti-diabetic or anti-hypertensive dietary supplement

An anti-diabetic or anti-hypertensive fish protein hydrolysate is provided, in which the fish is of the genus Salmo or Oncorhynchus, and wherein the fish protein is hydrolysed by a metalloendopeptidase obtainable from Bacillus amyloliquefaciens. Methods of making and methods for using such fish protein hydrolysates are also provided.

Estimation of accumulated lethality under pressure-assisted thermal processing

A study was conducted to develop an integrated process lethality model for pressure-assisted thermal processing (PATP) taking into consideration the lethal contribution of both pressure and heat on spore inactivation. Assuming that the momentary inactivation rate was dependent on the survival ratio and momentary pressure-thermal history, a differential equation was formulated and numerically solved using the Runge-Kutta method. Published data on combined pressure-heat inactivation of Bacillus amyloliquefaciens spores were used to obtain model kinetic parameters that considered both pressure and thermal effects. The model was experimentally validated under several process scenarios using a pilot-scale high-pressure food processor. Using first-order kinetics in the model resulted in the overestimation of log reduction compared to the experimental values. When the n th-order kinetics was used, the computed accumulated lethality and the log reduction values were found to be in reasonable agreement with the experimental data. Within the experimental conditions studied, spatial variation in process temperature resulted up to 3.5 log variation in survivors between the top and bottom of the carrier basket. The predicted log reduction of B. amyloliquefaciens spores in deionized water and carrot purée had satisfactory accuracy (1.07-1.12) and regression coefficients (0.83-0.92). The model was also able to predict log reductions obtained during a double-pulse treatment conducted using a pilot-scale high-pressure processor. The developed model can be a useful tool to examine the effect of combined pressure-thermal treatment on bacterial spore lethality and assess PATP microbial safety. © 2013 Springer Science+Business Media New York.

Requirement for the cell division protein DivIB in polar cell division and engulfment during sporulation in Bacillus subtilis

During spore formation in Bacillus subtilis, cell division occurs at the cell pole and is believed to require essentially the same division machinery as vegetative division. Intriguingly, although the cell division protein DivIB is not required for vegetative division at low temperatures, it is essential for efficient sporulation under these conditions. We show here that at low temperatures in the absence of DivIB, formation of the polar septum during sporulation is delayed and less efficient. Furthermore, the polar septa that are complete are abnormally thick, containing more peptidoglycan than a normal polar septum. These results show that DivIB is specifically required for the efficient and correct formation of a polar septum. This suggests that DivIB is required for the modification of sporulation septal peptidoglycan, raising the possibility that DivIB either regulates hydrolysis of polar septal peptidoglycan or is a hydrolase itself. We also show that, despite the significant number of completed polar septa that form in this mutant, it is unable to undergo engulfment. Instead, hydrolysis of the peptidoglycan within the polar septum, which occurs during the early stages of engulfment, is incomplete, producing a similar phenotype to that of mutants defective in the production of sporulation-specific septal peptidoglycan hydrolases. We propose a role for DivIB in sporulation-specific peptidoglycan remodelling or its regulation during polar septation and engulfment.

Biodegradation of benzo[a]pyrene in soil by Mucor sp. SF06 and Bacillus sp. SB02 co-immobilized on vermiculite

Two indigenous microorganisms, Bacillus sp. SB02 and Mucor sp. SF06, capable of degrading polycyclic aromatic hydrocarbons (PAHs) were co-immobilized on vermiculite by physical adsorption and used to degrade benzo[a] pyrene (BaP). The characteristics of BaP degradation by both free and co-immobilized microorganism were then investigated and compared. The removal rate using the immobilized bacterial-fungal mixed consortium was higher than that of the freely mobile mixed consortium. 95.3% of BaP was degraded using the co-immobilized system within 42 d, which was remarkably higher than the removal rate of that by the free strains. The optimal amount of inoculated co-immobilized system for BaP degradation was 2%. The immobilized bacterial-fungal mixed consortium also showed better water stability than the free strains. Kinetics of BaP biodegradation by co-immobilized SF06 and SB02 were also studied. The results demonstrated that BaP degradation could be well described by a zero-order reaction rate equation when the initial BaP concentration was in the range of 10—200 mg/kg. The scanning electronic microscope (SEM) analysis showed that the co-immobilized microstructure was suitable for the growth of SF06 and SB02. The mass transmission process of co-immobilized system in soil is discussed. The results demonstrate the potential for employing the bacterial-fungal mixed consortium, co-immobilized on vermiculite, for in situ bioremediation of BaP.

Optimisation of Bacillus thuringiensis var. israelensis (Vectobac) applications for the blackfly control programme on the Orange River, South Africa

The Orange River, South Africa’s largest river, is a critical water resource for the country. In spite of the clear economic benefits of regulating river flows through a series of impoundments, one of the significant undesirable ecological consequences of this regulation has been the regular outbreaks of the pest blackfly species Simulium chutteri and S. damnosum s.l. (Diptera: Simuliidae). The current control programme, carried out by the South African National Department of Agriculture, uses regular applications, by helicopter, of the target-specific bacterial larvicide Bacillus thuringiensis var. israelensis. While cost-benefit analyses show significant benefits to the control programme, benefits could potentially be further increased through applying smaller volumes of larvicide in an optimised manner, which incorporates upstream residual amounts of pesticide through downstream carry. Using an optimisation technique applied in the West African Onchocerciasis Control Programme, to a 136 km stretch of the Orange River which includes 31 blackfly breeding sites, we demonstrate that 28.5% less larvicide could be used to potentially achieve the same control of blackfly. This translates into potential annual savings of between R540 000 and R1 800 000. A comparison of larvicide volumes estimated using traditional vs. optimised approaches at different discharges, illustrates that the savings on optimisation decline linearly with increasing flow volumes. Larvicide applications at the lowest discharge considered (40 m³·s^-1) showed the greatest benefits from optimisations, with benefits remaining but decreasing to a theoretical 30% up to median flows of 100 m3·s-1. Given that almost 70% of flows in July are less than 100 m³·s^-1, we suggest that an optimised approach is appropriate for the Orange River Blackfly Control Programme, particularly for flow volumes of less than 100 m³·s^-1. We recommend that trials be undertaken over two reaches of the Orange River, one using the traditional approach, and another using the optimised approach, to test the efficacy of using optimised volumes of B.t.i.

Enzymatic synthesis of isopropyl myristate using immobilized lipase from Bacillus cereus MTCC 8372

A purified alkaline thermo-tolerant bacterial lipase from Bacillus cereus MTCC 8372 was immobilized on a Poly (MAc- co -DMA- cl -MBAm) hydrogel. The hydrogel showed approximately 94% binding capacity for lipase. The immobilized lipase (2.36 IU) was used to achieve esterification of myristic acid and isopropanol in n -heptane at 65 °C under continuous shaking. The myristic acid and isopropanol when used at a concentration of 100 mM each in n -heptane resulted in formation of isopropyl myristate (66.0 ± 0.3 mM) in 15 h. The reaction temperature below or higher than 65°C markedly reduced the formation of isopropyl myristate. Addition of a molecular sieve (3 Å × 1.5 mm) to the reaction mixture drastically reduced the ester formation. The hydrogel bound lipase when repetitively used to perform esterification under optimized conditions resulted in 38.0 ± 0.2 mM isopropyl myristate after the 3 ^rd cycle of esterification.

Purification and characterization of a low molecular mass alkaliphilic lipase of Bacillus cereus MTCC 8372

A low molecular mass alkaliphilic extra-cellular lipase of Bacillus cereus MTCC 8372 was purified 35-fold by hydrophobic interaction (Octyl-Sepharose) chromatography. The purified enzyme was found to be electrophoretically pure by denaturing gel electrophoresis and possessed a molecular mass of approximately 8 kDa. It is a homopentamer of 40 kDa as revealed by native-PAGE. The lipase was optimally active at 55 °C and retained approximately half of its original activity after 40 min incubation at 55 °C. The enzyme was maximally active at pH 8.5. Mg ²⁺ , Cu ²⁺ , Ca ²⁺ , Hg ²⁺ , Al ³⁺ and Fe ³⁺ at 1 mM enhanced hydrolytic activity of the lipase. Interestingly, Hg ²⁺ ions synergized and Zn ²⁺ and Co ²⁺ ions antagonized the lipase activity. Among surfactants, Tween 80 promoted the lipase activity. Phenyl methyl sulfonyl fluoride (PMSF, 15 mM) decreased 98% of original activity of lipase. The lipase was highly specific towards p -nitrophenyl palmitate and showed a V _max and K _m of 0.70 mmol.mg ⁻¹ .min ⁻¹ and 32 mM for hydrolysis of p NPP.

Synthesis of ethyl acetate employing celite-immobilized lipase of Bacillus cereus MTCC 8372

A wide range of fatty acid esters can be synthesized by esterification and transesterification reactions catalyzed by lipases in non-aqueous systems. In the present study, immobilization of a purified alkaline extra-cellular lipase of Bacillus cereus MTCC 8372 by adsorption on diatomaceous earth (celite) for synthesis of ethyl acetate via transesterification route was investigated. B. cereus lipase was deposited on celite (77% protein binding efficiency) by direct binding from aqueous solution. Immobilized lipase was used to synthesis of ethyl acetate from vinyl acetate and ethanol in n -nonane. Various reaction conditions, such as biocatalyst concentration, substrates concentration, choices of solvents ( n -alkanes), incubation time, temperature, molecular sieves (3Å × 1.5 mm), and water activity(a _w ), were optimized. The immobilized lipase (25 mg/ml) was used to perform transesterification in n -alkane(s) that resulted in approximately 73.7 mM of ethyl acetate at 55 °C in n -nonane under shaking (160 rpm) after 15 h, when vinyl acetate and ethanol were used in a equimolar ratio (100 mM each). Addition of molecular sieves (3Å × 1.5 mm) as well as effect of water activity of saturated salt solutions (KI, KCl and KNO ₃ ) to the transesterification efficiency has inhibitory effect. Batch operational stability tests indicated that immobilized lipase had retained 50% of its original catalytic activity after four consecutive batches of 15 h each.

Synthesis of ethyl oleate employing synthetic hydrogel-immobilized lipase of Bacillus coagulans MTCC-6375

Ten polymeric hydrogels were chemically synthesized by varying the concentrations of copolymer (DMA) and cross-linker (MBAm) molecules. An alkaline lipase of Bacillus coagulans MTCC-6375 was immobilized onto a poly (MAc-co-DMA-cl-MBAm)-hydrogel support at pH 8.5 and temperature 55ºC in 16 h. The bound lipase possessed 7.6 U.g⁻¹ (matrix) lipase activity with a specific activity of 18 U.mg⁻¹ protein. Hydrogel bound-lipase catalyzed esterification of oleic acid and ethanol to synthesize ethyl oleate in n-nonane. Various kinetic parameters were optimized to produce ethyl oleate using immobilized lipase. The optimal parameters were bound enzyme/substrate (E/S) ratio 0.62 mg/mM, ethanol/oleic acid 100 mM:75 mM or 100 mM:100 mM, incubation time 18 h and reaction temperature 55ºC that resulted in approximately 53% conversion of reactants into ethyl oleate in n-nonane. However, addition of a molecular sieve to the reaction mixture promoted the conversion to 58% in 18 h in n-nonane, which was equivalent to 55 mM of ethyl oleate produced.

Synthesis of ethyl laurate by hydrogel immobilized lipase of Bacillus coagulans MTCC-6375

An alkaline thermo-tolerant lipase from Bacillus coagulans MTCC-6375 was purified and efficiently immobilized onto a synthetic hydrophobic poly (MAc-co-DMA-cl-MBAm)-hydrogel at pH 8.5 and temperature 55°C in 16 h. The hydrogel bound matrix possessed 7.6 IU g -1 matrix lipase activity with a specific activity of 18 IU mg -1 protein. Immobilized lipase was used to catalyze the esterification of lauric acid and ethanol to produce ethyl laurate in n-nonane. The reaction conditions that were optimized to produce ethyl laurate in n-nonane included enzyme/substrate (E/S) ratio, substrate concentration, reaction time and reaction temperature. The optimized parameters were E/S ratio of 0.5 mg mM -1, ethanol:lauric acid in ratio of 100 mM:100 mM and reaction time of 15 h at 65°C under continuous shaking (200 rpm). Optimized conditions resulted in 66% conversion of reactants into ethyl laurate in n-nonane in the presence of 300 mg molecular sieve mL -1 reaction mixture.

Enzymatic synthesis of isopropyl acetate catalysed by immobilized bacillus cereus lipase in organic medium

Selective production of fragrance fatty acid ester from isopropanol and acetic acid has been achieved using silica-immobilizedlipase of Bacillus cereus MTCC 8372. A purified thermoalkalophilic extracellular lipase was immobilized by adsorption onto the silica. The effects of various parameters like molar ratio of substrates (isopropanol and acetic acid; 25 to 100 mM), concentration ofbiocatalyst (25–125 mg/mL), reaction time, reaction temperature, organic solvents,molecular sieves, and initial water activity werestudied for optimal ester synthesis. Under optimized conditions, 66.0mM of isopropyl acetate was produced when isopropanol and acetic acid were used at 100mM: 75mM in 9h at 55◦C in n-heptane under continuous shaking (160 rpm) using bound lipase(25mg). Addition of molecular sieves (3 °A ×1.5mm) resulted in a marked increase in ester synthesis (73.0mM). Ester synthesiswas enhanced by water activity associated with pre-equilibrated saturated salt solution of LiCl. The immobilized lipase retained more than 50% of its activity after the 6th cycle of reuse.